Parts

- Chromoly steel with black oxide finish - 1.37" x 24tpi right hand thread - Requires a cog lockring (sold separately) - Compatible with 1/8-inch chains

This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames

All-City Singlespeed Disc Brake Adaptor 

• M4 threaded pedal cages mounting holes • Four windows in pedal body large enough to fit double toe straps • Polished Body • Concave footbed • Single-sided design

Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware

Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included. - Aluminum hatch cover with stainless screws - All necessary screws and plates included

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

Cost effective stopping power from the leader in cable-actuated disc brakes. - For use with short cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 215 g

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.

The Box Three BMX chain is polished and then chemically treated to achieve corrosion resistance. All Box Three chains have chamfered shifting edges, solid plates and solid pins to safeguard durability. Our unique inner link spacing is engineered to grab those modern wide/narrow chainrings. They are compatible with BMX 3/32" and 1/8" chainrings and cogs which fits most retro-modern 29 inch BMX bikes and smaller bikes.

The Box Four Wide/Narrow chainring completes that package for the 1x8 system. It is the first 8-speed specific chainring designed to optimize chain retention when using 8-speed chains. The tooth profile and thicknesses are tailored to match the inside geometry of the unique Box Four chain. FEATURES - Our 8 is Enough Chainring - Forged & CNC Steel - ED Black Protection - Wide / Narrow 8s Specific - 104 BCD Compatible